mise vs Nory: which inventory app fits your business?
By mise · Updated November 10, 2026
Quick answer: Nory is an AI back office for multi-site restaurant groups, covering staff costs, stock and ordering. mise is a focused inventory app for any business that keeps stock: scan a barcode or snap a photo and the AI sets up the item, so you can count and cost stock without typing in a catalog. If you want labor, stock and ordering in one platform for a restaurant group, look at Nory. If stock is the job, try mise free, no card.
Do it in mise
- Scan a barcode or snap a photo: mise's AI finds the product and brings it back categorized (name, brand, photo, category and size).
- Count by area as a team, right from your phone camera.
- Scan or photograph supplier invoices, log your sales, and see actual COGS, waste and what's below par.
- Build your order list and export to Excel or PDF.
Free trial, no card.
Scan a barcode or snap a photo: mise's AI finds the product and brings it back categorized, straight into your count. The same app gives you actual COGS, waste, par levels and a ready-to-send order list, with your team counting by area.
What sets mise apart
- Scan once, the product is classified. Read any barcode with the camera or a Bluetooth scanner, or snap a photo of the label: mise brings back the name, brand, group, size and photo, already sorted. No item setup.
- A product base that is already built. Your items are usually in it before you start. You can also upload your own list and mise fills in the rest.
- Alerts before you run out. Set a minimum for each product. Anything below it turns red and goes into a shopping list with how much is missing.
- Control stock from your phone. Count by location, with your team, and compare one count against another to see where the loss is.
- Bluetooth scale. Connect a scale to weigh open bottles, meat and bulk items; the weight goes into the product by itself.
Nory and mise both touch stock, but they come from different directions. Nory is an AI back office for multi-site restaurant groups, covering staff costs, stock and ordering. mise is a smart inventory app for any business that keeps stock: you scan a barcode or snap a photo, the AI sets up the item, and you count without entering products one by one. The right choice depends on whether you want one platform for several functions or a fast, focused way to count and cost your stock.
Side-by-side comparison
| mise | Nory | |
|---|---|---|
| What it is | A smart inventory app for any business that keeps stock. | An AI back office for multi-site restaurant groups. |
| Identifying and categorizing items | mise's AI does it for you from a barcode or a photo: name, brand, photo, category and size. You review it if you want to. | Items are set up in the platform. |
| Who it is aimed at | Bars, restaurants, cafes, bakeries, pharmacies, grocery and convenience stores, pet and beauty stores, liquor stores, hotels, distributors, retail. | Restaurant groups with more than one site. |
| Scope | Stock: team counts by area, recipe costing, actual COGS, waste, par levels, order list. | Labor, stock and ordering together. |
| Counting | Phone camera, by area, as a team. Works without internet while counting. | Ask the vendor how counting is done. |
| Supplier invoices | Scan or photograph them. | Ask the vendor how invoices are handled. |
| Getting started | free trial, no card, on Android, iPhone or the web. | Ask the vendor how onboarding works. |
| Cost | Costs far less, with unlimited items and counts, no cap on scans and no contract. | Depends on the vendor's plan. |
Where the table points you to the vendor, we are not guessing. We describe Nory only the way its own category is described: an AI back office for restaurant groups, covering labor, stock and ordering.
When Nory is the better fit
Nory is aimed at multi-site restaurant groups, so it is worth a serious look if that is you. The case for it is breadth: if you want staff costs, stock and ordering handled in one system and you already run on it, adding a second tool just for counting may not be worth the extra login.
It also makes sense if your head office wants one consistent set of figures across every site and is willing to invest in setting that platform up. A group with a central team can absorb that work. If that describes you, evaluate Nory on its own terms and use our Nory alternative guide to see what the other side of the argument looks like. mise can still sit alongside it to count stock with the camera and export the counts to Excel or PDF.
When mise is the better fit
mise fits better when the hard part is the count itself and the item list behind it. Scan a barcode or snap a photo, and the AI finds and categorizes the product, so nobody types in a catalog before the first count. That suits an independent restaurant, a cafe, a bakery, a bar or a small group that wants to see actual COGS and waste without adopting a whole back-office platform.
It also suits businesses that are not restaurants at all. Pharmacies, grocery stores, liquor stores, pet and beauty shops and hotels use the same flow. If you have a few venues of different types, one counting method for all of them is easier to teach than three different tools. For the multi-site angle in more detail, read about multi-location inventory.
A worked example: one restaurant, one weekly count
Time. Assume about 15 seconds per item including the quantity: 240 x 15 = 3,600 seconds, or 60 minutes. Shared between two people, that is about 30 minutes each, counting different areas at the same time.
Food cost. Opening stock is $1,850, purchases from the week's invoices are $6,200 and closing stock is $1,700. Usage is 1,850 + 6,200 - 1,700 = $6,350. With $21,000 in food sales, that is 6,350 / 21,000 = 30.2%.
Reading it. If last week's food cost was 28%, then 28% of $21,000 is $5,880. The $470 difference (6,350 - 5,880) is what you go and look for: over-portioning, waste, a price change from a supplier, or a miscount. The counts are only useful if they are comparable week to week, which is why a fast, repeatable count matters more than a perfect one.
How to decide: six questions
- How many sites do you run? One to a few points toward a focused tool; a large group may value a single platform.
- Is labor part of what you need to solve? If staff costs are a core problem, a back office that includes them has an edge. If stock is the problem, you do not need to pay for scope you will not use.
- Who will build and maintain the item list? If nobody has the time, an AI that sets up items from a scan removes that job.
- Do all your sites sell the same kind of products? A mix of venue types is easier with an app that is not restaurant-only.
- Can you test it with real counts? Whatever you choose, run one real area through it before you commit.
- Can you export your data? mise exports to Excel and PDF. Ask the same of any vendor.
The method behind a good count is the same in any tool, so it also helps to read how to do a stock take and how to track inventory variance.
How to try mise next to what you have
Start the free trial, no card required, and keep your current system running while you test:
- Choose one area, such as the walk-in, and count it the way you do today.
- Count the same area in mise with the camera. Review any item the AI got wrong.
- Compare the two counts and note the time each one took.
- Scan or photograph one supplier invoice and look at how it lands in your numbers.
- Export the count to Excel or PDF and see whether your manager can use it as is.
If it saves time and the figures hold up, repeat it for the next area. If it does not, you have spent a morning, not a contract.
Frequently asked questions
Is mise a replacement for a full restaurant back office?
No, and it does not try to be. mise is about stock: counting, recipe costing, actual COGS, waste, par levels and the order list. If you want one platform that also covers staff costs for a group of restaurants, that is the territory Nory describes for itself. Many operators only need the stock side to be fast and accurate, and that is where mise is strongest.
Can a single restaurant use mise?
Yes. A single restaurant, a cafe, a bar or a small shop can start with the free trial and a phone. There is nothing to install on a server and no item list to build first, because the AI sets up each item from a barcode or a photo.
What if I run several locations?
mise lets you count by area and bring a team in to count together, and you can compare one count against another. If your priority is a single platform covering labor, stock and ordering across a whole restaurant group, put that requirement first and ask each vendor to show it. If your priority is a fast, consistent way to count at each site, trial mise in one of them.
How does mise know what a product is?
You scan the barcode with the camera, or snap a photo of the label. The AI finds the product and returns it categorized, with name, brand, photo, category and size. You can review it if you want to. Items that have no barcode, such as house-made preparations, can be added manually once and then counted like any other.
Does mise work without a signal in the walk-in or the basement?
Yes, counting works without internet. Cold rooms and basement stores are often dead zones, so this is worth testing on your own premises during the trial rather than trusting a feature list.
How do I see where my food cost is leaking?
Count at the start and end of a period, add purchases from your invoices, and log sales. mise compares the counts and shows the differences and actual COGS, so you can see which products moved more than the sales explain. The recipe costing sheet then tells you what each dish should cost, which is the other half of the picture.